DropOS

2.8'' ESP32 Module ESP32-2432S028R WIFI+BT Dual-core 240X320 Smart Display Screen LCD This LCD module uses ESP32-WROOM-32 module as the main control, the main control is a dual-core MCU, integrated WI-FI and Blue-tooth functions, the main frequency can reach 240MHz, 520KB SRAM, 448KB ROM, Flash size is 4MB+4MB, The display resolution is240x320 ,resistive touch. The module includes LCD display screen, backlight control circuit, touch screen control circuit, speaker drive circuit, photo sensitive circuit and RGB-LED control circuit. TF-card interface, serial interface, temperature and humidity sensor interface (DHT11 interface) and reserved IO port interface, this module supports development in Arduino-IDE, ESP IDE,Micropy-thon and Mi-xly. Features： 2.8-inch color screen, support 16BITRGB65K color display, display rich colors 240X320 resolution The sample program has been programmed in the factory and can be plugged in With TF-card slot for easy expansion storage Provide arduino library functions and sample programs to facilitate rapid secondary development Support one-click download program Military-grade process standards, long-term stable work Parameters: Display color: RGB 65K color Resistive touch: ESP32-2432S028R Size: 2.8 inch Type: TFT Driver chip: ILI9341 Resolution: 320 x 240 (Pixel) - Effective display area: 43.2 x 57.6(mm) Module size: 50.0 x 86.0(mm) View: >60° Operating temperature: -20C~70℃ Storage temperature: -30℃~80℃ - Operating Voltage: 5V Power consumption: About 90mA Product weight: About 50g Install TF Card before upload code There are two ways to upload code to the screen: 1.uplode code via arduino IDE 2.upload code via espressif flash tool After finish flashing, unplug micro USB, then plug. More detail, pls check the Installation Manual (PDF) Package includes: 1 X 2.8'' ESP32 Dispaly Module 1 X USB Cable 1 X Touch Pen   ( Color: Light-pink or white or black or green) 1 X 4P Connector Cable 1 X Plastic packaging box for display